Security Series HardwareNGP-3300

NGP-3300

Security Series Panels

The NGP-3300 Series of Intelligent System Controllers (ISCs) by Lenel is designed for integrated intrusion and access control applications. As the engine for Lenel’s hybrid environment, this controller provides the power and capacity needed for larger intrusion and access control environments to be central monitored. Designed from the ground up to be Dual-Path Ethernet based panels, these controllers can also support transmitting events to Central Station receivers for intrusion reporting via HSC/IP or using WWM. Utilizing its native Dual-Path Ethernet communications and an advanced linux-based processor, the NGP-3300 Series Panels can communicate upstream to the host computer with failover protected throughput up to 8 times greater than the fastest serial connections. The NGP-3300 Series can support up to 500,000 cardholders, 1024 Standard or Intrusion Type Input Points, 256 Outputs, and 130 Doors (Entry/Exit Readers per Door). Four downstream SNAPP Communication ports can be used to connect multiple combinations of LCD Keypads, Input Control Modules, Output Control Modules, Card Reader Interface Modules, and Intelligent Power Supplies (up to 96 devices) giving this panel set a capacity to handle Enterprise level installations.

Based on a common hardware platform (shared with the NGP-2200 Security Series), the panels are license upgradable to provide multiple levels of feature-set. The NGP-3300 Series can be purchased with an Onboard Dual-Door Interface or in an Access Control Only configuration. Panels are supplied with an enclosure and appropriate power transformer based on region. See the chart below for available features and capacities.

Features & Functionality - Intrusion

  • 16 Pre-Defined Intrusion Point Types
  • (Entry/Exit, Route, Perimeter, Hold-Up, etc.)
  • Priority Area Arming/Disarming
  • Common Area Arming/Disarming
  • Schedule-based Arming
  • Two Stage Auto Arming
  • False Alarm Prevention Processing
  • Pre-processing /Transmission Delay
  • Bypass/Isolate/Restore Support
  • Invalid User Code Lockout
  • Fail to Close Alarm
  • ‘Work Late’ Schedule extensions by profile
  • 'Walk Test’ – Installation Mode

Features & Functionality - Access Control

  • Local Input / Output Support
  • Extended (ADA) Strike and Held Open Timings
  • Basic and Anti-Passback Based Area Counting
  • Maximum and Minimum (Two-Man) Occupancy Rules
  • Pending First User (First Card Unlock) Support
  • Anti-Passback (Hard, Soft, and Timed Area)

Features & Capacities - Panel

  • Supports up to 500,000 Cardholders (Badges)
  • Support for 1,000 Permission Profiles (Authorities)
  • Support for 130 Areas (Intrusion and Anti-passback)
  • 1024 Input Points / 256 Output Points
  • 50,000 Event Buffer (battery backed non-volitile memory)
  • Support for 130 Doors (In/Out Readers for Each Door)
  • Support for up to 32,000 Access Levels (Up to 128 per badge)
  • 255 Holidays with grouping, 250 Timezones (6 Intervals each)
  • Card Format Support (Magnetic, Weigand, Smart Card) up to 245 bits
  • Line (Circuit) Supervision (EOL) 4-State
  • On-Board Dual Port Network (10/100) Communications to Host
  • Dual Path Reporting Capable Monitoring and Central Station
  • AES 128 Bit Encryption – Host to Panel
  • Local and Remote Diagnostics
  • Onboard Power Support
  • Flash Updatable Firmware
  • On-Board Flash and Battery-backed RAM
  • Advanced Power Management

Features - OnGuard Software

  • Global Input / Output Support
  • Multi-Tenant Functions (Segmentation)
  • Pin Code Options
  • Event/Action Scheduling
  • Video Integration with Access Control and Intrusion
  • Video Linked to Events
  • E-mail Alerts

Reader Interface Functionality

  • Supports Wiegand Data1/Data0 and Magnetic Clock/Data readers and keypads (4/8 bit)
  • 2 Form-C relay outputs, 5 A @ 24 VDC / 2 Form-A relay outputs 1A @ 24VDC
  • Door contact, REX/RTC push-button, and Reader tamper, (open/closed) for each door
  • Strike control and auxiliary input/output for each door
  • Bicolor reader status LED support plus beeper control, or 2-wire LED support

Controller Options

  • NGP-3320
    • Board Only
  • NGP-3320i
    • Board, Intrusion
  • NGP-3320iUL
    • Board, Intrusion, Enclosure, 110VAC UL Power Supply
  • NGP-3320iCE
    • Board, Intrusion, Enclosure, 220VAC CE Power Supply

Specifications

  • Primary Power (DC or AC)
    • * The NGP-3300 is for use in low voltage, power-limited, class 2 circuits only.
    • Main Power Input
      • 18VAC or 24VDC ± 10%
    • Secondary Power Input
      • 12VDC ± 10% (will NOT charge backup battery)
  • Event Memory and Clock Backup
    • 3 V , CR2330
  • Communication Ports
    • Dual Ethernet Communication Ports
      • 10/100Base-T Ethernet high-speed ports
  • Inputs
    • 4-State each programmable as normally open or normally closed, supervised or unsupervised circuits
  • Outputs
    • Wiegand Data1/Data0, Magnetic Clock/Data, F/2F single-wire protocol, Bioscrypt RS-485,
    • Relay outputs
      • Two 1-Form-C relays for door strikes, 5A @ 24 VDC, resistive load
      • Three 1-Form-A relays for auxiliary and strobe outputs, 1A @ 24 VDC, resistive load
      • One 1-Form-C relay is for siren output, 1A @ 24 VDC, resistive loa
  • Reader Power
    • DC output
      • 12VDC
  • Reader Port Compatibility
    • Wiegand Data1/Data0, Magnetic Clock/Data
  • Environmental
    • Temperature
      • Operating: -10° to +55° C (14° to 131° F) / Storage: -40° to 85° C (-40° to 185° F)
    • Humidity
      • 10 to 93% RHNC
  • Mechanical
    • Dimensions
      • H 160mm x W 250mm x D 42mm (H 6.30 x W 9.84 x D 1.65 inches)
    • Weight
      • Weight of I/O board and SOM board: 0.47 kg
  • Approvals
    • CE-marked, ROHS compliant

Product Certifications

Download NGP-3300 Product Sheet (PDF)

Download NGP-3300 Product Sheet (PDF) (Español)